115 cm Monitor Stand Set with Tray & Phone Holder

115 cm Monitor Stand Set with Tray & Phone Holder

A complete home for your dual-monitor setup

Bring warmth and order to your workspace with the Musowood 115 cm (45.28 in) Monitor Stand Set. A black walnut veneer surface over a marine plywood core pairs with aluminum alloy legs, while the included storage tray and phone holder keep everyday essentials close at hand.

• Room for two 27-inch monitors: a 115 × 23 cm (45.28 × 9.06 in) shelf supports a dual-monitor setup. Check both monitor bases and their placement to ensure they fit fully on the shelf.
• Walnut finish, layered construction: real black walnut veneer gives the surface its natural wood character, with a marine plywood core and aluminum alloy legs beneath.
• Storage tray included: the fixed steel tray provides an accessible place for small desk items. Its felt lining is fixed in place; the tray does not slide out.
• Phone holder included: keep your phone nearby in portrait or landscape orientation, adjust its orientation, and connect a charging cable while it rests in the holder. Fits phones up to 12 mm (0.47 in) thick, including the case.
• Raise your screens and organize your desk: the stand lifts your monitors and creates space beneath the shelf for everyday workspace organization.
• Assembly hardware supplied: install the legs and accessories with the included screws, screwdriver, and hex key.

Dimensions & materials

• Monitor stand external dimensions (L × W × H): 115 × 23 × 11.5 cm / 45.28 × 9.06 × 4.53 in
• Complete set net weight: approximately 4.99 kg / 11 lb, including the tray and phone holder
• Shelf: black walnut veneer over a marine plywood core
• Legs: aluminum alloy
• Tray: 2 mm (0.079 in) steel with fixed 1 mm (0.039 in) felt lining
• Tray external dimensions: 33 × 22 × 4.7 cm / 12.99 × 8.66 × 1.85 in
• Phone holder: steel with silicone pads
• Phone holder external dimensions: 12.7 × 5.5 × 4 cm / 5.00 × 2.17 × 1.57 in

What's included

• 1 × monitor stand shelf with legs for assembly
• 1 × storage tray with fixed felt lining
• 1 × phone holder with silicone pads
• 4 × M5 × 16 mm countersunk screws for the legs
• 4 × M5 × 14 mm screws for the tray
• 1 × M5 × 14 mm screw for the phone holder
• Screwdriver and hex key for assembly

Monitors, phone, charging cables, and other display items are not included.

Assembly & compatibility

Assembly is required. Attach the legs with the four M5 × 16 mm countersunk screws and included screwdriver. Attach the tray and phone holder to the corresponding M5 mounting points using their M5 × 14 mm screws and the included hex key. Use the screws assigned to each component and check that all parts are secure before placing equipment on the stand.

The included tray uses four M5 mounting points with 30 × 15 cm (11.81 × 5.91 in) center-to-center spacing. This is the mounting hole spacing, not the tray's external dimensions.

Care

Wipe the shelf and metal parts with a soft, dry or lightly damp cloth, then dry promptly. Avoid soaking, abrasive cleaners, and prolonged moisture or direct heat. Gently brush dust from the fixed felt lining.

Frequently asked questions

Are the tray and phone holder included?
Yes. This set includes both accessories and their mounting screws.

Is the shelf solid walnut?
The shelf has a real black walnut veneer surface over a marine plywood core.

Can it hold two 27-inch monitors?
Yes. Check that both monitor bases fit fully on the 115 × 23 cm (45.28 × 9.06 in) shelf in your intended arrangement. Screen size alone does not determine base fit.

Does the tray slide out?
No. The tray is fixed in place, and its felt lining is not removable.

Does it arrive assembled?
No. The legs require assembly. Installation screws, a screwdriver, and a hex key are included.